Loading... Please wait...

Popular Brands

Our Newsletter


Installation Instructions

Here you'll find installation instructions for your boat, vehicle and wall decals. 

How to install your vinyl wall decal - for smaller decals

How to install vinyl wall decal - center hinge method - for larger decals

How to install vinyl decal on car or truck window

 

 

How to install vinyl decal on car or truck window

  1. Decide on the best location for your sticker. For best results make sure to clean your desired sticker location. This will insure that your decal will adhere to the surface easily.
  2. Peel the paper backing away from the sticker slowly. Be sure that it stays attached to the transfer tape.
  3. Carefully position your sticker on the desired surface. Once, the decal sticks you will not be able to reposition the sticker.
  4. Use a hard edge object like a credit card to rub over the entire surface of the sticker. Be careful to make sure the sticker is fully adhered to the surface, and remove any air bubbles.
  5. Slowly remove the transfer tape. Pull the transfer tape downward in an angular fashion. Make sure that the entire decal is removed from the transfer tape, and remains on the surface.
  6. Check the sticker for any air bubbles. The bubbles can be removed by working them to the edge of the sticker. If it's too difficult to move the air bubble, try making a small pin hole in it. This will allow the air to leave, and you won't see the pin hole.